Peugeot P0011

VVT 'A' over-advanced Bank 1 on Peugeot — 1.6 THP Prince VVT solenoid and chain stretch (208 GTi/308/RCZ).

Peugeot P0011 — VVT 'A' over-advanced Bank 1 on Peugeot — 1.6 THP Prince VVT solenoid and chain stretch (208 GTi/308/RCZ). Typical UK independent garage cost: £60–£2400.

What actually causes P0011 on a Peugeot

Prince engine P0011 starts as a £25 VVT solenoid screen clog and ends as a £2k timing kit. Always clean screens first.

Peugeot engines that log P0011

• 1.6 THP EP6 (208 GTi/308/RCZ)
• 1.6 VTi EP6C (208/308)

How we diagnose P0011 on a Peugeot

1. Pull VVT solenoids and inspect screens
2. Clean and refit, clear codes
3. If returns within 200 miles, chain stretch
4. Live cam deviation read

The common misdiagnosis to avoid

Cleaning the solenoid screens is free — never quote a chain kit without doing that first.

Peugeot P0011 repair cost in the UK

Expect £60–£2400 including parts and labour at an independent garage. Main-dealer quotes on Peugeot are usually higher for the same job, and the spread exists because the cheap cause and the expensive cause throw the same code — pay for the diagnosis before you pay for parts.

Bob's workshop tip

208 GTi P0011 — solenoid clean is 30 minutes and free. Always start there.

Codes usually seen alongside P0011 on Peugeot

• P0014
• P0016
• P0341

Symptoms drivers report with P0011

• Engine rattles like a 'bag of nails' for 3 seconds on a cold start.
• The car felt fine on the motorway, but now it stalls every time I stop at a roundabout.
• Noticeable 'flat spot' or hesitation when trying to overtake in 3rd gear.
• Lumpy, hunting idle that makes the gearstick vibrate.
• Fuel economy has tanked—getting about 10mpg less than usual.

Repairs that clear P0011

• Engine flush and oil change
• Replace VVT solenoid
• Replace cam phaser if needed

For the generic, all-makes explanation of this code — meaning, every known cause and UK cost bands — see our P0011 guide.

Reading P0011 on a Peugeot properly

A generic reader will show P0011 and nothing else. What matters is the freeze-frame data stored with it — engine speed, load, coolant temperature and fuel trims at the moment the fault was logged — plus whether any other module on the Peugeot has logged something at the same time. Codes rarely arrive alone, and the order they were stored in usually points at which one is the cause and which are the consequences.

Clearing P0011 without fixing it

Erasing the code resets the Peugeot's readiness monitors as well as the light. The fault returns on the next drive cycle if the cause is still there, and in the meantime the incomplete monitors can stop the car passing an emissions check. After a genuine repair, the car is driven until the relevant monitor completes before it is handed back.

Bob's Mechanical Repairs is an independent garage in Birnam, Dunkeld, Perthshire, with 32 years of Bob's experience on the tools. If P0011 is showing on your Peugeot, bring any scan results with you — we will read the live data ourselves, confirm which cause it actually is, and price the repair before any work starts.