Bob's Mechanical Repairs

Land Rover Fault Codes — Real Causes, Fixes & UK Costs

Bob's Mechanical Repairs — independent family-run garage in Birnam, Dunkeld, Perthshire. Call 01350 727 276 or email [email protected].

Get a free quote

What Land Rover codes (P0420, P0087, P0299, P0430, P2002) actually mean on Land Rover engines — the real cause, the common misdiagnosis, and the honest UK repair cost.

These are the OBD fault codes we see most often on Land Rover vehicles in the workshop, with the real cause on Land Rover engines rather than the generic textbook definition, plus the honest independent-garage cost.

Land Rover fault codes explained

  • P0420 — Catalyst efficiency on Land Rover — TDV6 3.0 diesel cat/DPF system and L322 petrol V8 cat failures. Typical UK cost £700–£3500.
  • P0087 — Fuel rail pressure too low on Land Rover 2.7/3.0 TDV6 — Discovery 3/4 and Range Rover Sport HP pump shaft wear. Typical UK cost £700–£6500.
  • P0299 — Turbo underboost on Land Rover 2.7/3.0 TDV6 — twin-turbo system imbalance or split intercooler hose. Typical UK cost £220–£2800.
  • P0430 — Bank 2 cat efficiency on Land Rover 5.0 V8 / 3.0 V6 supercharged — Range Rover/Range Rover Sport. Typical UK cost £320–£3800.
  • P2002 — DPF efficiency below threshold on Land Rover — 2.7/3.0 TDV6 and 2.0 Ingenium DPF clogged. Typical UK cost £260–£3200.

Codes are generic across manufacturers, but the fix is not. The same code on a Land Rover usually points at a different component than it would on another make, which is why a make-specific diagnosis saves money before any parts are bought.

Reading codes properly on a Land Rover

A £20 reader pulls generic engine codes and nothing else. On a Land Rover the useful information often sits in the gearbox, ABS, body or comfort modules, and those need a tool that talks the manufacturer protocols. Just as important is the freeze-frame data stored with the code: engine speed, load, coolant temperature and fuel trims at the exact moment the fault was logged. That snapshot is usually what separates a failing sensor from a real mechanical problem, and it is the first thing we look at before anything is unbolted.

Why the same code costs different money on a Land Rover

Each code on this page has a cost range rather than a price because the cheap cause and the expensive cause log identically. A split hose and a failed turbo can both set a boost code. Access matters too — some Land Rover engines put the awkward part behind half the front end, and the labour, not the part, is what moves the bill. An honest quote names which cause has been confirmed and what the repair for that specific cause costs.

Getting a Land Rover fault diagnosed

Bob's Mechanical Repairs is an independent, family-run garage in Birnam, Dunkeld, Perthshire, a couple of minutes off the A9. Bob has 32 years on the tools, and diagnostics are charged as diagnostic time with the findings explained in plain English and the repair priced before any work is agreed. An MOT is £54.85 if the car is due one at the same time.

Common questions

How do I read fault codes on a Land Rover? Any generic OBD-II reader will pull engine codes from a Land Rover built after 2001, but manufacturer-level codes from the gearbox, ABS and body modules need a tool that speaks the Land Rover protocols. That is why a garage scan often finds codes a cheap reader misses.

Will clearing a Land Rover fault code fix it? No. Clearing the code only erases the record. If the fault is still present it returns on the next drive cycle, and in the meantime the readiness monitors are reset, which can stop the car passing an emissions check.

How much is a Land Rover diagnostic at an independent garage? An hour of diagnostic time is typically £50–£90 in the UK, against £110–£180 at a main dealer. It almost always costs less than the part it stops you buying by mistake.

Loading the full page…